Improved product solid ferric oxide desulfurizer agent for remove H2S
Basic Info
Model No.: HC-BD0031
Product Description
Improved product solid ferric oxide desulfurizer agent for remove H2S
For many years China's chemical industry raw gas humidity, higher pressure, airspeed, large wire-speed , severe hypoxia, degree of purification increasingly demanding features. We plant in well-developed, manufacture the product. By special production process from a new generation high-precision, high-sulfur content of iron oxide sorbent.
solid ferric oxide desulfurizer agent feature:
1,High desulphurization precision: imported H2S up to 100mg / Nm3, the export H2S≤0.5mg / Nm3.
2,Big working sulfur capacity: one to remove H2S sulfur content of up to 8-10%.
3,Good strength and water resistance: 15 seconds boiled or normal temperature water soak for without mudding, soaking dried and regenerative activity and intensity unchanged.
solid ferric oxide desulfurizer agent usage:
The desulfurization agent is widely used in food-grade CO2 gas, methanol feed gas, methanation ammonia synthesis feed gas desulfurization and other highly precision, can replace more expensive zinc oxide at room temperature and domestic and foreign products.
solid ferric oxide desulfurizer agent specification:
item | index |
total saturation adsorption capacity mg/g | 700-800 |
loading density Kg/L | 0.65-0.75 |
water volume % | 40-45 |
Desulphurization precision PPm (imported H2S ≤10mg / m3,contact time ≥45 seconds) | ≤0.05 |
The radial compressive strength N/cm | ≥40 |
moisture % | ≤10 |
Water resistant strength | after water immersion, no broken and argillation naturally |
Normal operating conditions of use :
1, airspeed: under atmospheric pressure ,suitable for airspeed 300-1000 / h
2, temperature: 15-55 ° C
3, pressure: atmospheric pressure 8.0MPa
4, contact time: ≥45seconds
Pre-sale:
(1) according to customer product specification production.
(2) according to the special requirements of customers, product customization.
(3) packaging industry can be packaged according to customer requirements.
After-Sale:
(1) assign a dedicated service personnel arrived at the scene to guide customers to debug.
(2) on-site training of operators.
(3) within a year if the product quality problems, we will promptly deal with custom
Contact us if you need more details on Solid Ferric Oxide Desulfurizer Agent. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Solid Ferric Oxide Desulfurizer Agent for Remove H2s、Improved Product Solid Ferric Oxide Desulfurizer Agent. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Biogas Desulfurizer